2024 Vermeer® Trailed Mowers TM135
- Year 2024
- Make Vermeer®
- Model Trailed Mowers
2024 Vermeer® Trailed Mowers TM135
Clean cut with convenienceThe Vermeer TM135 trailed mower is a mid-sized option — 13.5-ft (4.1-m) cutting width — for operators who need more capacity but aren’t quite ready for a large trailed mower. It’s designed to maximize efficiency by minimizing maintenance time. When it’s time to mow, the TM135 delivers a consistent, clean cut in various crops and ground conditions. Plus, with options like a 2-point quick hitch or drawbar hitch, and 540 rpm or 1,000 rpm, you can customize your mower to meet your operation’s needs.
Features may include:
Q3® cutter bar- Maximize productivity and minimize maintenance time with a heavy-duty, modular, shaft-driven cutter bar. Not only is it backed by the Vermeer 3-year cutter bar coverage, but two features make it quick and convenient to replace key components — the Quick-Clip® blade retention system and Quick-Change™ shear ring. Get back up and mowing in the field.
- Suspension largely dictates your ability to get a consistent cut. This system ensures optimal suspension to minimize ground pressure for a clean cut across the field. For varying field conditions, you can make quick and toolless suspension adjustments. Now you control how you cut.
- Mow around tight corners with the swivel gearbox on the drawbar. With a pivoting header gearbox and a CV joint, the mower can operate on the side of or directly behind the tractor. Plus, if you ever need to mow above an obstacle in the field, simply bump a lever to raise the pitch using the tractor hydraulics. Then bump the lever back down and you’re back to the original cut height. All while the mower never leaves the ground. Full control comes with this mid-sized trailed mower.
- The frame is the backbone of any trailed mower, and this mower is equipped with one of the most robust frames in the field. Durable components like a heavy-duty frame and large tires are ready to withstand varying field conditions for years to come.
- There are two hitch options to choose from but either provide a convenient, one-person hookup — the drawbar swivel hitch or patented 2-point Quick Hitch. Both have a balanced pivoting drawbar connection to make hitching-up a hassle-free, one-person job. Hitch up and mow.
- Get back to mowing. The greaseless vertical driveline and greaseless tongue pivot features helps to optimize routine maintenance to get you back in the field.
- Routine maintenance is unavoidable, but with the large fold-up curtain providing access to each cutter unit, it’s convenient. This cutter bar is an open book when it comes to changing blades or checking and replacing oil.
PTO
PTO Power, Rated Engine Speed
horsepower recommended: 52.2 kw | Drive: 540 rpm or 1,000 rpm
Drivetrain
Driveline
Torque Protection: friction disc clutch
Suspension
Suspension
Hydraulic
Wheels & Tires
Tires, Rear Specification
31x13.5-16
Operational
Operating Speed
Disc: 2700 rpm
Hydraulics
Hydraulic Type
2 remote, single-acting lift, double-acting swing
Hydraulic Flow
Rate: 22.7 L/min
Maximum Pressure
131 bar
Chassis
Hitch/Type
Drawbar with swivel gearbox, OR 2-point with swivel gearbox, category II or III N
Dimensions
Dimensions
Mower swung out offset: 127 cm | Disc Diameter: 58.4 cm
Length
Working: 5.2 m
Width, Working Position
4.4 m
Height
Working: 154.9 cm | cut: 1 in - 3 in (2.5 cm - 7.6 cm) | Cutter bar lift clearance: 40.6 cm
Cutting Width
4.1 m
Transport Length
5.5 m
Transport Width
Ends up: 4.1 m | Ends down: 4.4 m
Transport Height
154.9 cm
Weights
Weight
Tongue: 544.3 kg | Total: 1632.9 kg
Features
Features
Number of Blades: 18 | Number of Discs: 9
Construction Material
Curtain:1400 g/m2 polyester woven material with flexible PVC covering
Adjustability
Angle: Hydraulic pitch control
Cutterbar Type
Q3®