2024 Vermeer® Trailed Mowers TM710
- Year 2024
- Make Vermeer®
- Model Trailed Mowers
2024 Vermeer® Trailed Mowers TM710
2024 Vermeer® Trailed Mowers TM710
The trail to better mowing starts here.Even before you start mowing, you will experience the simplicity of TM710 trailed mowers. It starts at hookup. Connect the hitch, PTO and hydraulics, and you’re ready to go to the field. Narrow transport widths and toolless suspension adjustments help you mow and go. Horsepower requirements (55 hp [40.4 kW]) are an average of 20% lower than comparable 3-pt disc mowers). Plus, it delivers the consistent, clean cut you’ve come to expect from Vermeer trailed mowers.
Features may include:
Easy hitch hookup- Hitch up easily. The hookup procedure is straightforward; after the hitch, PTO and hydraulics are connected it’s ready to go to the field.
- Goes easy on horsepower, only requiring a 55 hp (41 kW) tractor for a 9.2 ft (2.8 m) cut.
- Absorbs shock loads with a patented rubber torsion design that keeps the weight of the cutter bar on the ground until it needs to float over field obstacles.
- Maneuvers around obstacles with ease, thanks to the hydraulic swing cylinder.
- Replace blades in seconds using the exclusive Quick-Clip™ blade retention system.
PTO
PTO Power, Rated Engine Speed
horsepower recommended: 41 kw | Drive: 540 rpm
Drivetrain
Driveline
Torque Protection: friction disc clutch
Suspension
Suspension
Rubber torsion
Wheels & Tires
Tires, Rear Specification
27x9.5-15
Operational
Operating Speed
Disc: 2797 rpm
Hydraulics
Hydraulic Type
2 double-acting
Hydraulic Flow
Rate: 22.7 L/min
Maximum Pressure
86.2 bar
Chassis
Hitch/Type
Drawbar
Dimensions
Dimensions
Disc Diameter: 50 cm
Length
Working: 4.4 m
Width, Working Position
4.1 m
Height
Working: 116.8 cm | cut: 1.3 in - 3 in (3.2 cm - 7.6 cm)
Transport Length
4.7 m
Cutting Width
2.8 m
Transport Width
2.9 m
Transport Height
116.8 cm
Weights
Weight
Tongue: 285.8 kg | Total: 997.9 kg
Features
Features
Number of Blades: 14 | Number of Discs: 7
Construction Material
Curtain: 1 ply 1/8 in rubber
Adjustability
Angle: Manual turnbuckle