2025 Bush Hog® DSP Series DSP10
- Year 2025
- Make Bush Hog®
- Model DSP Series
2025 Bush Hog® DSP Series DSP10
2025 Bush Hog® DSP Series DSP10
Bush Hog’s new DSP Line of Pull-Type Drag Scrapers, with standard fixed axle, is ideal for moving large quantities of material, leveling, and finish grading. The DSP units come available in 8’, 10’ and 12’ widths. Material can be transferred by dragging it to nearby locations and raising the scraper to deposit the load. Surfaces can be graded and leveled by scraping material from high areas and allowing accumulated material to flow under the grader blade into lower areas. The DSP scrapers are designed for 70 to 125 horsepower tractors and have replaceable wear plates on the sides.
Features may include:
PERFORMANCE- Available in 8-foot, 10-foot, and 12-foot widths
- DSP scrapers are designed for 70 to 125 horsepower tractors
- Replaceable wear plates on the sides.
Engine
Engine Power
Rating: 70 TO 125 hp
Wheels & Tires
Tires, Rear Specification
NEW 9.5L X 15 8 PLY RIB TL ON RIM 5 WITH 5.5 BHC
Operational
Operating Speed
Maximun transport: 20 MPH
Dimensions
Dimensions
Dump clearance: 21-INCHES | Maximum tilt angle: 3 1/2° | Tongue construction: 4×4-INCHES X 1/4-INCH TUBING | Side plate construction: 3/8×24 5/16-INCHES HIGH X 39 3/4INCHES DEEP | Moldboard construction: 1/4-INCH X 24 1/4-INCHES HIGH WHEN FORMED | Lift cylinder: 3 1/2-INCHES X 8-INCHES ASAE | Tilt cylinder: 3 1/2-INCHES X 8-INCHES ASAE
Transport Width
121-INCHES
Width, Working Position
120 3/16-INCHES
Depth, Maximum
Of box: 39-INCHES | Maximum cutting: 5-INCHES BELOW GRADE | Maximum tilit to the right: 7 5/8-INCHES
Cutting Edge Size
1/2-INCH X 6-INCHES REVERSIBLE & REPLACEABLE | Reinforcement: 3-INCHES X 3-INCHES X 5/16-INCH ANGLE PLUS A 1/4-INCH MOLD BOARD = 9/16-INCH AT THE CUTTING EDGE
Capacities
Volume
2 1/4 CU. YDS.
Weights
Weight
Without material in weight box Tilt Axle: 1645-LB / No tilt axle: 1525-LB / Of material in weight box: 760-LB